Shop
Showing all 13 results
-
Uncategorised
Arduino CNC shield V3
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: SE-00007 -
Uncategorised
Arduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
UncategorisedArduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
- The Nano is an ultra-small simple I/O platform based on open source code. It has a big advantage in size compared to the old USB version. Micro-controller : Atmel ATmega328
- Operating Voltage (logic level) : 5 V Digital I/O Pins : 14 (of which 6 provide PWM output) Analog Input Pins : 8 DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (of which 2KB used by bootloader) SRAM : 2 KB EEPROM : 1 KB Clock Speed : 16 MHz
SKU: SE-00003 -
Uncategorised
Arduino Pro Mini ATMEGA328P 5V
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: SE-00004 -
-
Uncategorised
DRV8825 Stepper Motor Driver
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: SE-00009 -
-
Uncategorised
NEO-6M GPS MODULE
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: SE-00013 -
Uncategorised
SIM800L GSM GPRS Module
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, Make or receive phone calls, connecting to internet through GPRS, TCP/IP, and more.
SKU: SE-00012