Free Delivery from $50
99% Positive Feedbacks
365 days for free return
Payment Secure System
Only Best Brands
Product Carousel Tabs
Uncategorised
SIM800L GSM GPRS Module
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, Make or receive phone calls, connecting to internet through GPRS, TCP/IP, and more.
SKU: SE-00012
Uncategorised
Arduino Pro Mini ATMEGA328P 5V
Microcontroller: ATmega328P
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
6 PWM port: D3, D5, D6, D9, D10, D11.
Use For Atmel Atmega328P-AU microcontroller.
Support serial download.
Support 9V battery.
A pair of TTL level serial port transceiver : RX / TX.
SKU: SE-00004
Uncategorised
NEO-6M GPS MODULE
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
SKU: SE-00013
Uncategorised
Arduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)

Uncategorised
Arduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
The Nano is an ultra-small simple I/O platform based on open source code. It has a big advantage in size compared to the old USB version. Micro-controller : Atmel ATmega328
Operating Voltage (logic level) : 5 V Digital I/O Pins : 14 (of which 6 provide PWM output) Analog Input Pins : 8 DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader) SRAM : 2 KB EEPROM : 1 KB Clock Speed : 16 MHz
SKU: SE-00003
Uncategorised
Arduino CNC shield V3
Latest Arduino CNC Shield Version 3.10
GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Coolant enable
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
SKU: SE-00007
Uncategorised
DRV8825 Stepper Motor Driver
Supply Voltage: 8.2 – 42 VDC.
Current Capacity : 2.2A max(24V).
Continuous current per phase: 1.5 A.
Minimum Logic voltage: 2.5V.
Maximum Logic Voltage: 5V.
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Dimensions : 15 x 20 mm.
Weight: 4 gm.
SKU: SE-00009
Bestsellers
Top Categories this Month
Trending Products
Recommendation for your manager
Uncategorised
NEO-6M GPS MODULE
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
SKU: SE-00013
Uncategorised
SIM800L GSM GPRS Module
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, Make or receive phone calls, connecting to internet through GPRS, TCP/IP, and more.
SKU: SE-00012
Uncategorised
DRV8825 Stepper Motor Driver
Supply Voltage: 8.2 – 42 VDC.
Current Capacity : 2.2A max(24V).
Continuous current per phase: 1.5 A.
Minimum Logic voltage: 2.5V.
Maximum Logic Voltage: 5V.
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Dimensions : 15 x 20 mm.
Weight: 4 gm.
SKU: SE-00009
Uncategorised
Arduino CNC shield V3
Latest Arduino CNC Shield Version 3.10
GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Coolant enable
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
SKU: SE-00007
Uncategorised
Arduino Pro Mini ATMEGA328P 5V
Microcontroller: ATmega328P
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
6 PWM port: D3, D5, D6, D9, D10, D11.
Use For Atmel Atmega328P-AU microcontroller.
Support serial download.
Support 9V battery.
A pair of TTL level serial port transceiver : RX / TX.
SKU: SE-00004
Uncategorised
Arduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)

Uncategorised
Arduino Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
The Nano is an ultra-small simple I/O platform based on open source code. It has a big advantage in size compared to the old USB version. Micro-controller : Atmel ATmega328
Operating Voltage (logic level) : 5 V Digital I/O Pins : 14 (of which 6 provide PWM output) Analog Input Pins : 8 DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader) SRAM : 2 KB EEPROM : 1 KB Clock Speed : 16 MHz
SKU: SE-00003